| APS Intercooled Twin Turbo System |
|
The following is a comprehensive list of all components included in the APS Intercooled Twin Turbo System. |
Component Information
|
Model No.:
|
APSCC6-HFA/01 | |||
|
Description:
|
HIGH FLOW AIR INTAKE ASSEMBLY | |||
|
Application:
|
GM CORVETTE C6 | |||
| Item No. | Picture | Part No. | Description | Qty. |
| 1 |  |
435-029-800 | AIR FILTER ELEMENT |
2
|
| 2 |  |
775-031-000 | BRACKET - ELEMENT MOUNTING |
2
|
| 3 |  |
000-951-480 | SCREW - S/T - 4.6mm x 16mm |
2
|
| 4 |  |
000-310 | WASHER - BODY 6mm x 16mm |
2
|
| 5 |  |
000-204 | NUT - NYLOC 6mm x 1.0 |
2
|
| 6 |  |
775-025-000 | BY-PASS VALVE RETURN ADAPTOR |
2
|
| 7 |  |
000-884-060 | HOSE-AIR CLEANER/COMP INLET-70mmIDx600mm |
2
|
| 8 |  |
775-022-000 | DUCT - AIR ENTRY - S/S - LHS |
1
|
| 9 |  |
775-022-200 | DUCT - AIR ENTRY - S/S - RHS |
1
|
| 10 |  |
775-023-200 | HOSE-COMPRESSOR ENTRY-LHS-2.5"IDX600mm |
1
|
| 11 |  |
775-023-400 | HOSE-COMPRESSOR ENTRY-RHS-2.5"IDx500mm |
1
|
| 12 |  |
000-927 | CLAMP - HOSE - 60/80mm |
6
|
| 13 |  |
000-047-000 | BLOW-OFF VALVE - RECIRCULATING |
2
|
| 14 |  |
775-855-000 | HOSE, SILICON BLOW-OFF VALVE OUTLET |
2
|
| 15 |  |
000-926 | CLAMP - HOSE - 50/70 mm |
4
|
| 16 |  |
000-903 | CLAMP - HOSE - 25/40mm |
6
|
| 17 |  |
000-832-300 | HOSE - RUBBER - 6mm ID x 3000mm |
1
|
| 18 |  |
775-994-135 | HOSE - BREATHER - 10mm ID x 1350mm - LHS |
1
|
| 19 |  |
775-994-078 | HOSE - BREATHER - 10mm ID x 780mm - RHS |
1
|
| 20 |  |
000-911 | CLAMP - SPRING |
4
|
| 21 |  |
000-990-300 | VALVE - ONE WAY - PCV |
1
|
| 22 |  |
780-994-000 | HOSE - PCV - INTAKE/VALVE |
1
|
| 23 |  |
000-911-017 | CLAMP - SPRING |
4
|
| 24 |  |
000-912-100 | CLAMP - SPRING |
6
|
| 25 |  |
000-974 | TEE-PIECE -STEEL 1/4" |
1
|
| 26 |  |
775-855-100 | HOSE - SILICONE 25mmID x 25mm |
4
|
| 27 |  |
000-987-178 | TIE STRAP-NYLON 4.8mm x 178mm |
4
|
| Model No.: | APSCC6-TCA/01 | |||
| Description: | TURBOCHARGER SUB-ASSEMBLY | |||
| Application: | GM CORVETTE C6 | |||
|
Item No.
|
Picture | Part No. | Description |
Qty.
|
|
30
|
 |
775-060-000 | TURBOCHARGER ASSEMBLY - LHS
WATER COOLED TWIN BALL BEARING GT SERIES |
1
|
|
31
|
 |
775-060-200 | TURBOCHARGER ASSEMBLY - RHS
WATER COOLED TWIN BALL BEARING GT SERIES |
1
|
| Model No.: | APSCC6-BCK/01 | |||
| Description: | BOOST CONTROL KIT | |||
| Application: | GM CORVETTE C6 | |||
|
Item No.
|
Picture | Part No. | Description |
Qty.
|
|
50
|
 |
000-829-300
|
HOSE - RUBBER - 5.6mm x 3,000mm |
1
|
|
51
|
 |
000-917 | CLAMP - HOSE |
4
|
|
52
|
|
000-974 | TEE - PIECE - 1/4" |
1
|
|
53
|
 |
000-911-014 | SPRING CLIP-5/16" HOSE |
1
|
| Model No.: | APSCC6-TOA/01 | |||
| Description: | TURBOCHARGER OUTLET SUB-ASSEMBLY | |||
| Application: | GM CORVETTE C6 | |||
|
Item No.
|
Picture | Part No. | Description |
Qty.
|
|
70
|
 |
775-003-000 | PIPE ASSEMBLY - TURBINE OUTLET - LHS |
1
|
|
71
|
 |
775-003-200 | PIPE ASSEMBLY - TURBINE OUTLET - RHS |
1
|
|
72
|
 |
000-109 | STUD - 8mm x 1.25 x 1.0 x 28mm S/S |
10
|
|
73
|
 |
000-208 | NUT - SELFLOC - 8mm x 1.0 |
10
|
|
74
|
 |
000-302-300 | WASHER - FLAT - 8mm S/S |
10
|
|
75
|
 |
775-012-400 | HEAT SHIELD - LHS/RHS |
2
|
|
76
|
 |
775-012-500 | HEAT SHIELD - OIL FILTER |
1
|
|
79
|
 |
000-035 | BOLT - HEX - 10mm x 1.5 x 60mm |
4
|
|
80
|
 |
000-303 | WASHER - FLAT 10mm |
4
|
|
81
|
 |
000-257 | NUT - FLANGED - 10mm x 1.5 |
4
|
|
82
|
 |
000-951-600 | SCREW - S/T 8mm x 19mm |
4
|
|
83
|
 |
000-951-500 | SCREW - S/T 4.5mm x 16mm |
8
|
|
84
|
 |
000-321-300 | WASHER-BODY 6mm x 20mm S/S |
2
|
|
85
|
 |
775-083-900 | LOOM - 02 SENSOR EXTENSION |
2
|
|
Model No.:
|
APSCC6-EMA/01 | |||
|
Description:
|
EXHAUST MANIFOLD SUB-ASSEMBLY | |||
|
Application:
|
GM CORVETT C6 | |||
| Item No. | Picture | Part No. | Description | Qty. |
|
90
|
 |
775-001-000 | EXHAUST MANIFOLD - LEFT |
1
|
|
91
|
 |
775-001-200 | EXHAUST MANIFOLD - RIGHT |
1
|
|
92
|
|
000-208 | NUT - SELFLOC - 8mm x 1.0 |
20
|
|
93
|
 |
000-101 | STUD - S/S - 8mm x 1.25 x 1.0 x 23mm |
8
|
|
94
|
|
000-109 | STUD - S/S - 8mm x 1.25 x 1.0 x 28mm |
12
|
|
95
|
|
000-302-300 | WASHER - FLAT - S/S - 8mm |
20
|
|
96
|
 |
775-012-000 | HEAT SHIELD - EXHAUST MANIFOLD - LHS |
1
|
|
97
|
 |
775-012-200 | HEAT SHIELD - EXHAUST MANIFOLD - RHS |
1
|
|
98
|
 |
000-000-300 | BOLT - HEX - 6.0mm x 1.0 x 10mm S/S |
11
|
|
99
|
|
000-321-300 | WASHER - BODY - 6.0mm x 20mm S/S |
11
|
|
100
|
 |
775-752-000 | HOSE ASSEMBLY - CLUTCH |
1
|
|
101
|
 |
000-638 | ADAPTOR - ST - 6mm TUBE (OLIVE) x 7/16" JIC |
2
|
|
102
|
 |
775-012-600 | HEAT SHIELD-EX. MANIFOLD/STARTER MOTOR |
1
|
|
103
|
 |
000-988-360 | TIE STRAP - 7.9mm x 360mm S/S |
4
|
|
104
|
 |
000-856-030 | FIRE SLEEVE - CLUTCH LINE -10 x 300mm |
1
|
|
Model No.:
|
APSCC6-FMI/01
|
|||
|
Description:
|
INTERCOOLER SUB-ASSEMBLY
|
|||
|
Application:
|
GM CORVETTE C6
|
|||
| Item No. | Picture | Part No. | Description | Qty. |
|
120
|
 |
775-242-000 | HOSE-SILICON INTERCOOLER - INLET - LHS |
1
|
|
121
|
 |
775-242-100 | HOSE-SILICON COMP DISCHARGE-REAR-LHS |
1
|
|
122
|
 |
775-242-200 | HOSE-SILICON INTERCOOLER - INLET - RHS |
1
|
|
123
|
 |
775-242-300 | HOSE-SILICON COMP DISCHARGE-REAR-RHS |
1
|
|
124
|
 |
775-025-200 | JOINER-S/S 50mm O.D x 70mm long |
2
|
|
125
|
 |
000-987-290 | TIE STRAP - NYLON 290mm |
2
|
|
126
|
 |
000-925 | CLAMP - HOSE 40/60mm |
6
|
|
127
|
|
000-926 | CLAMP - HOSE 50/70mm |
2
|
|
129
|
 |
775-041-000 | INTERCOOLER ASSEMBLY - LHS |
1
|
|
130
|
 |
775-041-200 | INTERCOOLER ASSEMBLY - RHS |
1
|
|
131
|
 |
775-039-100 | BRACKET - INTERCOOLER MTG - OUTER |
2
|
|
132
|
 |
775-039-300 | BRACKET - INTERCOOLER MTG - INNER |
2
|
|
133
|
 |
000-002-100 | BOLT - HEX - 6mm x 1.0 x 14mm (SEMS) |
8
|
|
134
|
 |
000-013-100 | BOLT - HEX - 8mm x 1.25 x 25mm (SEMS) |
4
|
|
135
|
 |
000-954-000 | RIVET - NUT - 8mm x 1.25 |
4
|
|
136
|
 |
775-243-000 | HOSE - SILICON - INTERCOOLER OUTLET |
1
|
|
137
|
 |
000-837-500 | HOSE - SILICON - MAF/THROTTLE BODY |
1
|
|
138
|
 |
000-928 | CLAMP - HOSE 70/90mm |
2
|
|
139
|
 |
000-929 | CLAMP - HOSE 80/100mm |
1
|
|
140
|
|
000-930 | CLAMP - HOSE 90/110mm |
2
|
|
141
|
 |
775-044-100 | DUCT - AIR DIRECTIONAL - INTERCOOLER |
2
|
|
142
|
 |
775-044-000 | DUCT - AIR DIRECTIONAL - RADIATOR CENTRE |
1
|
|
143
|
 |
775-044-200 | DUCT - AIR DIRECTIONAL - RADIATOR UPPER |
1
|
|
144
|
 |
775-044-300 | DUCT - AIR DIRECTIONAL - RADIATOR RHS |
1
|
|
145
|
|
000-951-500 | SCREW - S/T 4.6mm x 16mm |
12
|
|
146
|
|
775-953-300 | RUBBER EDGING 3,000mm |
1
|
|
147
|
 |
775-083-800 | LOOM - HORN RELOCATION |
1
|
|
148
|
|
000-225 | BODY CLIP - SELF TAPPER |
2
|
| 149 | |
000-960-200 | BODY CLIP - PLASTIC |
1
|
| Model No.: | APSCC6-TFA/01 | |||
| Description: | TURBOCHARGER FLUID SUB-ASSEMBLY | |||
| Application: | GM CORVETTE C6 | |||
|
Item No.
|
Picture | Part No. | Description |
Qty.
|
|
175
|
|
000-987-365 | CABLE TIE - 7.8mm x 365mm |
6
|
|
176
|
|
000-987-178 | CABLE TIE - 4.8mm x 178mm |
10
|
|
177
|
 |
000-011-100 | BOLT - HEX 8mm x 1.25 x 16mm (SEMS) |
1
|
|
178
|
 |
000-039 | BOLT - S/H - 6mm x 20mm |
1
|
|
179
|
 |
000-321 | WASHER - BODY 6mm x 20mm |
1
|
|
180
|
 |
000-315 | WASHER - COPPER - 16/20 |
1
|
|
181
|
 |
000-639 | ADAPTOR - ST. - 16mm x 1.5 x 7/16"JIC |
1
|
|
182
|
|
775-962-500 | HOSE ASSEMBLY - OIL SUPPLY TAKEOFF |
1
|
|
183
|
 |
000-653 | ADAPTOR - 90° 7/16"JIC x 1/4" NPT |
1
|
|
184
|
 |
000-094-150 | VALVE - SOLENOID (NPT) |
1
|
|
185
|
 |
000-623 | ADAPTOR - ST. - 1/8"NPT x 1/4"NPT |
1
|
|
186
|
 |
780-961-100 | BLOCK - OIL DISTRIBUTION |
1
|
|
187
|
 |
000-601 | ADAPTOR - ST. - 1/8"NPT x 7/16"JIC |
1
|
|
188
|
 |
000-651 | ADAPTOR - 90° 7/16"JIC x 1/8" NPT |
1
|
|
189
|
 |
775-094-000 | BRACKET - SOLENOID VALVE |
1
|
|
190
|
 |
000-093 | BOLT - B/H CAP SCREW - 4mm x 10 |
2
|
|
191
|
 |
000-300 | WASHER - FLAT - 4mm |
2
|
|
192
|
 |
000-025 | BOLT - HEX - 10mm x 1.5 x 16mm |
1
|
|
193
|
 |
000-309 | WASHER - SPRING - 10mm |
1
|
|
194
|
 |
775-083-600 | LOOM - OIL PRESSURE SENDER EXTENTION |
1
|
|
195
|
|
775-962-000 | HOSE ASSEMBLY - OIL SUPPLY - BANJO/ST. - LHS |
1
|
|
196
|
|
775-962-200 | HOSE ASSEMBLY - OIL SUPPLY - BANJO/ST - RHS |
1
|
|
197
|
 |
000-313 | WASHER - COPPER 12mm x 18mm |
3
|
|
198
|
 |
000-949-350 | BOLT - BANJO - 12mm x 7/16"SAE |
2
|
|
199
|
 |
000-328 | WASHER - COPPER - 11mm |
2
|
|
200
|
 |
000-418 | GASKET - OIL DRAIN |
2
|
|
201
|
 |
780-969-000 | DRAIN - OIL, FLANGE - 18mm x 1.5 |
2
|
|
202
|
 |
000-043 | BOLT-S/H 8mm x 1.25 x 20mm |
4
|
|
203
|
 |
000-305-200 | WASHER - STAR 8mm SILVER |
4
|
|
204
|
|
000-316 | WASHER - COPPER 18mm x 24mm |
4
|
|
205
|
 |
000-949-050 | BOLT - BANJO - 18mm |
2
|
|
206
|
 |
775-836-000 | HOSE ASSEMBLY - OIL DRAIN, BANJO/ST, LHS |
1
|
|
207
|
 |
775-836-200 | HOSE ASSEMBLY - OIL DRAIN, BANJO/ST, RHS |
1
|
|
208
|
 |
000-615 | ADAPTOR - ST. - 3/4"JIC x 3/8"NPT |
2
|
|
209
|
 |
780-836-950 | ADAPTOR - "Y" PIECE - 3/8"BSP/NPT |
1
|
|
210
|
 |
000-614 | ADAPTOR-ST.-9/16"UNO x 3/8"BSP (MOD 9.2mmID) |
1
|
|
211
|
|
000-836-999 | PUMP - OIL SCAVENGE |
1
|
|
212
|
 |
775-089-000 | BRACKET - PUMP MTG |
1
|