| APS Tough Boy Strut Brace |
|
In order to improve the engine's breathing ability and deliver balanced air flow distribution to all cylinders (in high horsepower Naturally Aspirated and Forced Induction applications), the plenum takes-up the region where the stock strut brace is situated.
To solve this issue, APS has engineered a cross brace that picks up the stock strut brace mounting points and ties those points with a tough and rigid beam - delivering the optimum amount of bracing between the two strut towers without undue stress that can lead to stress fractures.
The APS Tough Boy strut brace is a direct bolt-on and rose-jointed system that is delivered complete with every nut and bolt - for easy installation. |
Bill of Materials
| Model No.: | APS350Z-STB/01 | ||
| Description: | STRUT TOWER BRACE | ||
| Application: | Nissan 350Z | ||
| Item No. | Part No. | Description | Qty. |
| 1 | 435-720-100 | BRACE TUBE - Cross | 1 |
| 2 | 000-721-000 | SPHERICAL JOINT - 12mm | 2 |
| 3 | 435-720-200 | BRACKET - Strut, LHS | 1 |
| 4 | 435-720-300 | BRACKET - Strut, RHS | 1 |
| 5 | 000-1013-300 | BOLT - B/H - 12mm x 1.75 x 40mm (S/S) | 2 |
| 6 | 000-214-300 | NUT - Nyloc - 12mm x 1.75 (S/S) | 2 |
| 7 | 000-331-300 | WASHER - Flat - 12mm (S/S) | 4 |
| 8 | 000-259-300 | NUT - Flange - 12mm x 1.75 x 22mm O.D (S/S) | 2 |
| 9 | 000-1002-300 | BOLT - B/H - 10mm x 1.25 x 20mm | 4 |
| 10 | 000-1006-300 | BOLT - B/H - 10mm x 1.25 x 40mm | 2 |
| 11 | 000-303-300 | WASHER - Flat ,10mm (S/S) | 6 |
| 12 | 000-935 | CLAMP - CUSHION 25/15 | 2 |
| 13 | 000-204-300 | NUT - Nyloc - 6mm x 1.0 (S/S) | 2 |
| 14 | 000-310-300 | WASHER - FLAT, 6mm (S/S) | 2 |
Installation Diagram
